This signal booster and a rugged 802.11b/g router, the Bullet2 is designed for extreme long-distance wireless network bridging. Plug an Ethernet 10/100 network patch cable into the weather-proof housing, and then attach the Bullet2 directly to an outdoor antenna... no antenna cables necessary. Use requires a compatible PoE injector (sold separately), a directional outdoor antenna with an "N" type female coupler, and a matching system in direct line of sight at the far end of the bridge. Performance depends on antennas used and environmental conditions. Operation may not be legal in all jurisdictions.
Spec:
Connector 1: RJ-45 10/100 Ethernet with PoE jack
Connector 2: "N" type male coax coupler
Processor: Atheros 180MHz 4KC
Memory: 16MB SDRAM & 4MB flash
TX power: Up to 20 dBm
Sensitivity: Down to -95 dBm
Max. power consumption: 4W
Measurements: 6 1/4"L x 1 1/2"diam
